Product | Use | Application | Benefit | Packaging | Delivery time |
Accell Clean® | |||||
Accell 3 | Wastewater treatment, protection of WW-system and sewer lines | Additive, 12mg/L up to 34 mg/L | Beats corrosion, odor. Treats BOD, TSS, H2S, FOG and DO levels in water | 20L, 60L, 208L, IBC | 1 to 3 weeks |
Accell Clean DPP | Cleaning agent for metals removing grease, oil, HFO | Additive to (sea)water, spray, soak and brush | Saves 80% time, 20% less product use, IMO approved | 5L, 20L, 208L, IBC | 1 to 3 weeks |
Accell Clean DWD | Oil dispersant for deep and coastal waters | irspray or boatspray surface at 40L per 0.5 km² or 10gal/acre | No solvents or caustics. Stimulates bio-degradation of oils and contaminant | 20L, 60L, 208L, IBC | 1 to 3 weeks, 1 to 2 days in emergency |
Accell Clean HDD | Cleaning, degreasing industrial kitchen and restaurant equipment | Dilute with water, spray, brush, wipe | Water based, no solvents. Works very fast on grease, baked in oils and particulate matter | 1L, 5L, 20L | 1 to 3 weeks |
Accell Clean Marine | Biodegradable agent for cleaning zinc silicate coated tanks | Dilute with water. Mixing ratio depending, 5-20L/m³ | Cuts working time and Total Cost of Project significantly. IMO certified for chemical tanker cleaning | 20L, 60L, 208L, IBC | 1 to 3 weeks |
Accell Clean Marine Plus | Biodegradable heavy-duty agent for cleaning chemical cargo tanks | Dilute with water. Mixing ratio depending, 5-20L/m³ | Cuts working time and Total Cost of Project significantly. IMO certified for chemical tanker cleaning | 20L, 60L, 208L, IBC | 1 to 3 weeks |
Accell Clean SBR | Soil Bioremediation | Dilute with water, add 6% to 20% of SBR to total | Increases biodegradation rate of hydrocarbon in soil without use of chemicals | 5L, 20L, 208L, IBC | 1 to 3 weeks |
Accell Clean SWA | Cleaning agent for oil-contaminated surfaces, shores and mangroves/seagrass
|
Dilute 0.25% – 3%with water. Spray, brush, wipe.
|
Accelerates bio-degradation of organic contaminate. Saves 80% time.
FDA approved.Listed on US EPA schedule
|
20L, 60L, 208L, IBC
|
1 to 3 weeks |
Product | Use | Application | Benefit | Packaging | Delivery time |
ARCHOIL | |||||
Archoil AR2100 | Thermal fluid and system conditioner | Additive, mixing ratio 1:10 to 1:20 | Maintains high flash-point, prevents carbon build up | 20L, 200L, IBC | 1 to 3 weeks |
Archoil AR2300 | Oil and fluid system cleaner | Additive, 1:16 to 1:30 mix ratio | Maintains clean sump, pan, oil, fluid | 1L, 5L, 20L, 200L | 1 to 3 days |
Archoil AR4400 | Dry film WS² lubricant
|
Spray or drip
|
Provides lubrication in dusty environments. Extreme heat and pressure resistant | ¼ L spraybottle, 5L | 1 to 3 days |
Archoil AR5100 | Rust remover | Additive to water 1:5 to 1:20. Bathing | Removes all rust, even in threads | 1L, 5L, 20L, 200L | 1 to 4 days |
Archoil AR5500 | Offshore duty corrosion protection | Spray, brush or dip | Remains flexible in cold. Extreme wash-out resistance | 1L, 5L, 20L
or 500ml aerosol can |
1 to 3 days |
Archoil AR5600
|
Corrosion passivator and steel wire rope lubricant | Fluid lubricant, bath or brush | Remains flexible in cold, no dripping in heat. Heavy duty corrosion protection and lubricant in one | 5L, 20L, 60L, 200L | 1 to 3 days |
Archoil AR6400D-Max | Cleaner concentrate for diesel engine, turbo, diesel particle filter, catalyst | Additive to diesel fuel 1:100 to 1:200, one time shot | Cleans and lubricates. Restores fuel efficiency | 0,43L, 1L, 5L, 20L, 200L, 1000L | 1 to 4 days |
Archoil AR6900 | |||||
Archoil AR6915 | Marine diesel fuel modification | Additive to marine diesel fuel 1:3000 | Optimizes fuel burn-rate. Cleans engine, pistons and rings
Reduces emissions Lubricates fuel injection system |
5L, 200L | 1 to 4 days |
Archoil AR6940 | Marine HFO / RMG fuel modification | Additive to HFO and RMG fuels 1:6000 | Optimizes fuel burn-rate. Cleans engine, pistons and rings. Saves 5% to 15% | 5L, 20L, 200L, 1000L | 1 to 4 days |
Archoil AR8100 | Nanoborate grease | Brush, pump | Extreme long service life due to chemical bonding in surface | 400gr tube, 5kg, 20kg
|
1 to 3 days |
Archoil AR8200 | Nanoborate grease | Brush, pump | Extreme long service life due to chemical bonding in surface | 400gr tube, 5kg, 20kg
|
1 to 3 days |
Archoil AR8300 | Nanoceramic grease | Brush, pump | Extreme long service life due to chemical bonding in surface. Restores scratches and asperities | 400gr tube, 5kg, 20kg
|
3 to 5 days |
Archoil AR9100 | Nanoborate friction modifier | Additive, 1:8 to 1:28 mix ratio | Increases oil and fluid lifetime with factor 4, 5 or 6 | ¼ L, 1L, 5L, 20L, 208L
|
1 to 3 days |
Archoil AR9100AE | Nanoborate friction modifier, workshop spray | Aerosol spray | Extreme long service life due to chemical bonding in surface. Unique anti-corrosion properties | 500ml spraycan | 1 to 3 days |
Product | Use | Application | Benefit | Packaging | Delivery time |
JAQUET | |||||
Jaquet Alphabox | Engine monitoring system | Mounted sensors and software, bus, 4/20 | Shows all relevant data regarding engine internals, torque and torsion, visible online | Box, portable, fixed | Project installation |
MDE CHEM | |||||
MDE Chem DCP500 | HFO/RMG and Diesel fuel improver
|
Additive, mixing ratio 1:640 to 1:15000 depending on engine
|
Lowers fuel consumption 5 – 15%, up to 70% less emissions | 5L, 20L, 208L, IBC | 1 to 3 weeks |
MDE Chem SandKlene950 | Sand and soil remediation system | Additive to water, mixing ratio depending | Effective separation of hydrocarbons from sand and soil. Low cost, no external heating needed. EPA NCP Listed | 5L, 20L, 208L, IBC | 1 to 3 weeks |
MDE Chem QS | HFO additive injection system | Mounted device | Secures unattended mixing ratio additives | Box | Project installation |
Product | Use | Application | Benefit | Packaging | Delivery time |
NADICO | |||||
Titan Protect TA2201 | Self cleaning glass coating, air purificator | Nanocoating applied by cloth, sponge, brush, roller or airgun. Specialist job | Self cleaning glass surface reacting on light. No cleaning required. Converts organic dirt into O² | 1L, 5L, 20L, 208L | 1 to 5 days |
Titan Protect TA2202 | Selfcleaning hydrophobic nanocoating for synthetics, acrylics, plastics | Nanocoating applied by cloth, sponge, brush, roller or airgun. Specialist job | Self cleaning coating, keeps fabric from fouling, staining and odour | 1L, 5L, 20L, 208L | 1 to 5 days |
Titan Protect TA2203 | Selfcleaning hydrophobic nanocoating for metals | Nanocoating applied by cloth, sponge, brush, roller or airgun. Specialist job | Self cleaning coating, keeps metals from fouling, staining and odour | 1L, 5L, 20L, 208L | 1 to 5 days |
Titan Protect TA2206 | Hygiene maintenance nanocoating for walls, carpets, paints | Nanocoating applied by cloth, sponge, brush, roller or airgun. Specialist job | Self cleaning coating for low light areas, crowded areas | 1L, 5L, 20L, 208L | 1 to 5 days |
Titan Protect TA2219 | Air Purificator. Air quality improving coating
|
Nanocoating applied by cloth, sponge, brush, roller or airgun. Specialist job
|
Converts pollen, odour and VOC from the air, brings back O²
|
1L, 5L, 20L, 208L
|
1 to 5 days |
Titan Protect TP2223 | Titan Protect all surface primer | Nanocoating applied by brush, roller or airgun. Specialist job
|
Protects paintwork and other host material from active particles in Titan Protect TA-series | 1L, 5L, 20L, 208L | 1 to 5 days |
Product | Use | Application | Benefit | Packaging | Delivery time |
nC | |||||
nC 4100 Electric | Insulating nanoshield for electra | Spray | Prevents all electra from corroding or short cutting around, in and under water | 500ml spraycan | 1 to 3 days |
nC Glass Marine | Hydrophobic glass coating, salt shield | Nanocoating applied by cloth, sponge, brush, roller or industrial airgun | Prevents dirt and salt from sticking. Glass remains clean and can kept clean with water only | 1L, 5L, 20L | 1 to 5 days |
nC Textile Marine | Hydrophobic water shield for textures and textiles | Nanocoating applied by cloth, sponge, brush, roller or airgun | Keeps textile from soaking up fouling, stains and water |
1L, 5L, 20L, 208L
|
1 to 5 days |
nC Solar Marine | Output improving nanocoating for solarpanels in marine areas | Nanocoating applied by cloth, sponge, brush, roller or airgun. Specialist job | Improves output with 5% – 15% annually. Makes glass scratch resistant | 1L, 5L, 20L, 208L | 1 to 5 days |
nC Protect 4200 | Anti-fouling, non-corrosive, abrasion resistant, watertight and transparent. For metals | Nanocoating applied by cloth, sponge, brush, roller or airgun. Specialist job | Easy-to-clean, extremely abrasion resistant, chemical resistant, food grade | 250ml, 1L, 5L | 1 to 3 days |
nC Protect 4300 | Anti-fouling, non-corrosive, abrasion resistant, watertight and transparent nanocoating. For metals, synthetics and HDPE | Nanocoating applied by cloth, sponge, brush, roller or airgun. Specialist job | Easy-to-clean, extremely non-stick, non-corrosive, chemical resistant, food grade | 250ml, 1L, 5L | 1 to 3 days |
nC Protect 4400 | Anti-fouling, watertight and transparent nanocoating. For (U)HDPE. | Nanocoating applied by cloth, sponge, brush, roller or airgun. Specialist job | Easy-to-clean, bonds into surface, extremely wear resistant, chemical resistant, food grade | 250ml, 1L, 5L | 1 to 3 days |
nC Protect 4500 | Anti-fouling, watertight and transparent nanocoating. For Stainless Steel and aluminium. | Nanocoating applied by cloth, sponge, brush, roller or airgun. Specialist job | Easy-to-clean, anti-fingerprint, bonds into surface, extremely wear resistant, chemical resistant, food grade | 250ml, 1L, 5L | 1 to 3 days |
nC Protect 4600 | Anti-fouling, non-corrosive, abrasion resistant, watertight and transparent. Finish for thermal insulating coatings | Nanocoating applied by cloth, sponge, brush, roller or airgun. Specialist job | Easy-to-clean, extremely abrasion resistant, chemical resistant, food grade | 250ml, 1L, 5L | 1 to 3 days |
nC Nano Corrosion Passivator Marine | Corrosion passivator
Nanotechnique for metals |
Applied by brush, spray or bath | Stops progression of existing corrosion or prevents it on new metal without any surface preparation | 5L, 20L, 208L, IBC | 1 to 5 days |
nC Nano Corrosion Passivator Marine #2 Grease | Corrosion passivating #2 grease | Brush, roller, pump or greasing system | Nanotechnique penetrates and bonds into surface, removing and preventing corrosion | 5kg, 20kg, 60kg, 208kg | 1 to 5 days |
Perma Film | Flexible hardcoat finish for nC Nano Corrosion Passivator Marine | Brush, roller or airgun | DNVGL approval. CAP I, CAP II | 3L, 20L, 208L | 1 to 5 days |
Product | Use | Application | Benefit | Packaging | Delivery time |
nC® ProTherm | |||||
Nanotechnology-based thermal insulating coating. | Brush, roller or airgun | Reduces energy consumption 20%- 40%, takes no space, thermal and acoustic insulating. provides safe touch. | 5 kg, 20 kg, 65 kg or 350 kg | 1 to 3 weeks | |
nC® ProTherm Safe-Touch |
Nanotechnology-based thermal insulating and safe touch coating | Knife or airgun | Temperature reductions uf surfaces up to 260 degrees C | 5 kg, 20 kg, 65 kg or 350 kg | 1 to 3 weeks |
Nanotechnology-based insulation and corrosion prevention coating. | Brush, roller or airgun | Reduces energy consumption 20%- 40%, takes no space, provides corrosion and metal passivation. Welding resistant. | 5 kg, 20 kg, 65 kg or 350 kg | 1 to 3 weeks | |
Nanotechnology-based insulation and fire retardant coating | Knife, airgun | Reduces energy consumption 20%- 40%, takes no space, Resists fires up to 24 hours at 900 deg C | 5 kg, 20 kg, 65 kg or 350 kg | 1 to 3 weeks | |
nC® ProTherm dB-X |
Nanotechnology-based thermal and acoustic insulating coating | Brush, roller or airgun | Reduces energy consumption 20%- 40%, takes no space. Acoustic insulating properties | 5 kg, 20 kg, 65 kg or 350 kg | 1 to 3 weeks |
|