Thermal Insulating Coatings in short:
nC® ProTherm is a series of sprayable and brushable thermal insulating coatings. With additional properties as acoustic insulation in dB-X, Safe-Touch, fire retardancy in Fire-X and corrosion passivation in CUI-X, you can always find the suitable thermal insulating coating for your situation.
Especially with the sol-gel nanotechnology basis, these thermal insulating coatings are here to stay. Long lasting lifetime cycles of more than 15 years outdoors. Life-long expectancy indoors. Because of the ability to insulate with a very thin layer of coating, the nC® ProTherm coatings offer space saving and cost reducing at a high degree of insulation. Consequently, with an U-value at 4,2 W/(m²K) at 6 mm, and a lambda (λ)-value at 0,040 W/(mK), it keeps heat and cold in place. Different from traditional insulating coatings and aerogel based coatings, nC® ProTherm coatings are water-repelling and can operate in under water situations. Overall, they are UV-resistant.
nC ProTherm series of nanotech thermal insulation coatings are capable of withstanding harsh (marine) environments and are simple to apply. Hence, these coatings greatly reduce the maintenance and replacement costs over time due to their long life, their corrosion passivating capacities and the potential for visual inspection of your assets, as pipes and tubes do no longer hide behind cladding. But first of all, they reduce your energy related costs.
nC® ProTherm ISO-X is a strong nanotech 2-component coating that offers strong thermal insulating capacities on stone, concrete and wooden surfaces, as well as rooftiles. Safes a lot of space. Flexible at low and freezing temperatures. You can apply in just one layer up to 18mm, by means of brush, roller or spraygun. Very suitable for cruiseship, yacht, superstructure or home and/or office.
Powerful coating that delivers thermal insulation for applications where you want Safe Touch and space. Spray or knife on hot, in-service surfaces up to 750°C. This coating allows application in one layer. Thickness between 3mm and 8 mm brings a surface temperature change (delta-T) of between 60°C and max 260°C. Excellent solution for boilers and steampipes, but also for frosty areas. Hot application possible.
nC® ProTherm CUI-X is a very robust nanotech coating with a number of strong benefits: It delivers excellent thermal insulating capacities in combination with corrosion passivation, safe-touch surface and fire retardancy. Also acoustic insulation capacity is present. Direct-to-metal coating, application by knife or spraygun. You can apply in one layer of max. 18mm. Designed for operating temps at -50℃ to 440℃. For metals only. Suitable for submersion. Chemical resistent.
Specifically with a covalent bonding nanotechnology, the nC® ProTherm Fire-X Advanced Ceramics coating system aims for thermal insulation, IR-reflection and complete fire retardancy. Reduces surface temperatures Delat T up to 1000°C. As nC® ProTherm Fire-X Advanced Ceramics is fire retardant, it withstands temperatures up to 1300°C and keeps the structure’s integrity in place. Plastics won’t melt! It is suitable for metal, stone, concrete, synthetic and wooden surfaces.
Especially with covalent bonding nanotechnology, the nC® ProTherm dB-X coating system is here for thermal insulation and hindering noise conductivity. It is suitable for metal, stone, concrete, synthetic and wooden surfaces. This coating shows a very long service time for more than 15 years. Because of the ability to insulate with a very thin layer of coating, the nC® ProTherm coatings offer space saving and cost reduction at a high degree of insulation.